We understand better that enim ad minim veniam, consectetur adipis cing elit, sed do

MS structural steel: angles, channels, beams, pipes, rounds, flats and TMT from Mahawar Group

Mahawar Group · Mandi Gobindgarh, Punjab

Mild steel structural sections for sheds, factories, towers, trailers and construction: angles, channels, ISMB and NPB beams, pipes, rounds, flats, TMT bars, sheets and plates. Supplied by Mahawar Group, in steel since 1990, from Mandi Gobindgarh, Punjab’s steel town.

  • MS Angles
  • MS Channels
  • ISMB
  • NPB
  • ERW & GI Pipes
  • Hollow Sections
  • Rounds & Squares
  • Flats
  • TMT Bars
  • Sheets & Plates
Since 1990in iron & steel
12MS product lines
ISIDATA angles & channels
One stopsteel, roofing & PEB

Our MS product range

Tap “Ask today’s rate” on any product to send us a WhatsApp message. Steel prices change daily, so we quote on the day.

MS Angles

Equal angles for frames, trusses, towers and fabrication. Our group's ISI-marked DATA angles cover 35x35x4 to 75x75x10 mm, plus special sizes.

IS 2062 steel, IS 808 sizesAsk today’s rate on WhatsApp

MS Channels

C channels for purlins, frames, trailers and cable trays. DATA channels in 75x40 and 100x50 mm, in light, heavy and super-light.

IS 2062 steel, IS 808 sizesAsk today’s rate on WhatsApp

ISMB Beams / Joists

Indian Standard medium-weight I-beams with tapered flanges, for columns, rafters, mezzanines, crane girders and lintels.

IS 808 sectionsAsk today’s rate on WhatsApp

NPB Beams

Narrow parallel flange beams: straight flanges make bolting easy and give a good strength-to-weight ratio for modern steel frames.

IS 12778 sectionsAsk today’s rate on WhatsApp

ERW Pipes & Hollow Sections

Round pipes and square and rectangular hollow sections for structures, railings, sheds and fabrication.

IS 1239 / IS 1161 / IS 4923Ask today’s rate on WhatsApp

GI Pipes

Galvanised pipes for water lines, fencing and outdoor structures where corrosion protection matters.

IS 1239Ask today’s rate on WhatsApp

Scaffolding Pipes

Tubes for scaffolding and temporary works on building and industrial sites.

IS 4014Ask today’s rate on WhatsApp

MS Rounds & Squares

Round and square bars for shafts, fasteners, gates, grills and machined parts.

IS 2062 steel, IS 1732 sizesAsk today’s rate on WhatsApp

MS Flat Bars

Flats for base plates, brackets, stiffeners, gates and general fabrication.

IS 2062 steel, IS 1730 sizesAsk today’s rate on WhatsApp

TMT Bars & Binding Wire

TMT rebar for RCC work from SAIL, Jyoti, Tata, RINL and Jindal through our group company Mahawar Traders, with binding wire.

IS 1786 (TMT), IS 280 (wire)Ask today’s rate on WhatsApp

HR / CR Sheets & Plates

Hot-rolled and cold-rolled sheets and plates for base plates, gussets, tanks and fabrication.

IS 2062 (HR plates)Ask today’s rate on WhatsApp

GP & GC Sheets

Galvanised plain and corrugated sheets for roofing, cladding and ducting.

Galvanised sheetsAsk today’s rate on WhatsApp

DATA Steel: ISI-marked angles and channels from our group

Our group company Data Udyog makes mild steel angles and channels under the ISI-marked brand DATA in Mandi Gobindgarh, to IS 2062.

ProductSizes
Angles (basic range)35x35x4 to 75x75x10 mm
Angles (special sizes)45x45x4, 50x50x3, 50x50x8, 60x60x3, 60x60x4, 70x70x3, 70x70x4, 80x80x3 mm
Channels75x40 and 100x50 mm, in light, heavy and super-light

Thickness colour code on angle ends

3 mm4 mm5 mm6 mm8 mm10 mm

Sizes and colour codes as listed in the DATA angles and channels catalogue. Ask us for current stock and other sizes.

ISI-marked DATA mild steel anglesDATA mild steel channelMS angles with colour-coded painted ends

Which sections for which job?

PEB & industrial sheds

Steel buildings and sheds

  • NPB and ISMB beams for columns, rafters and mezzanines
  • Channels and angles for purlins, girts and bracing
  • Hollow sections for canopies and frames
  • Plates and flats for base plates, gussets and brackets

Towers & fabrication

Fabrication shops and towers

  • Angles for electrical and transmission towers
  • Channels for cable trays and supports
  • Flats, rounds and squares for brackets, shafts and gates
  • Hollow sections for railings and frames

Construction sites

Building and infrastructure sites

  • TMT bars and binding wire for RCC work
  • Scaffolding pipes for temporary works
  • ISMB beams for lintels and heavy supports
  • GI pipes for water lines

Vehicles & machinery

Trailers, bus bodies and machines

  • Angles and channels for truck trailers and bus bodies
  • Channels and beams for conveyors and EOT crane frames
  • Flats and rounds for agricultural equipment
  • Plates for machine bases

MS steel weight calculator

Theoretical weight of mild steel sections (steel density 7,850 kg/m³). Enter sizes in millimetres.

0.00kg per metre
0.00total kg

Formulas: round d²×0.006165; square a²×0.00785; flat w×t×0.00785; angle (2a−t)×t×0.00785; pipe (OD−t)×t×0.02466; square hollow 4(a−t)×t×0.00785. Actual weights vary with rolling tolerance and corner radius.

From our stock

Why buy MS steel from Mahawar Group?

In steel since 1990

Three decades in iron and steel trading and manufacturing, based in Mandi Gobindgarh.

Our own ISI-marked brand

DATA angles and channels made by our group company Data Udyog to IS 2062.

Steel, roofing and PEB together

Structural steel, colour-coated roofing sheets and complete pre-engineered buildings from one group.

Catalogues ready to download

Structural steel e-catalogue and angles & channels e-catalogue (PDF).

Get today’s rate for your steel list

Send the items, sizes, quantity and delivery location. We reply with a quotation.

    Frequently asked questions

    What MS structural products do you supply?

    Angles, channels, ISMB beams, NPB beams, ERW pipes and hollow sections, GI pipes, scaffolding pipes, MS rounds and squares, flat bars, TMT bars with binding wire, HR and CR sheets and plates, and GP and GC sheets, from Mandi Gobindgarh, Punjab.

    What is the difference between ISMB and NPB beams?

    ISMB beams are Indian Standard medium-weight I-beams to IS 808, with tapered inner flanges. NPB beams are narrow parallel flange beams to IS 12778: their flanges are straight, which makes bolted connections simpler and usually gives a better strength-to-weight ratio.

    Are your angles and channels ISI marked?

    Our group company Data Udyog makes angles and channels under the ISI-marked DATA brand, to IS 2062.

    What do the coloured marks on angle ends mean?

    They show thickness at a glance. On DATA angles: orange 3 mm, white 4 mm, green 5 mm, blue 6 mm, yellow 8 mm and purple 10 mm.

    How is the weight of MS steel calculated?

    Weight per metre = cross-section area x 7,850 kg/m3. For example, a round bar weighs d x d x 0.006165 kg per metre (d in mm), and a flat bar weighs width x thickness x 0.00785 kg per metre. Use the calculator on this page for other sections.

    Which TMT bar brands do you supply?

    Through our group company Mahawar Traders we deal in TMT bars from SAIL, Jyoti, Tata, RINL and Jindal.

    Can you supply the steel and also build a PEB shed?

    Yes. Mahawar Prefab Solutions designs, fabricates and erects pre-engineered buildings, and our group supplies structural steel and roofing sheets, so you can get both from one source.

    Related pages

    Share and Enjoy !

    Shares
    Shares