Roofing Sheet
Manufacturer in
Mohali
DATASHYNE colour coated sheets in PPGI and PPGL for Mohali's showrooms, offices, warehouses and industrial units — quoted with the trims, ridge and flashings that decide how the finished roof actually looks.
Metal Roofing & Cladding for Mohali's Visible Buildings
Mohali builds differently from the rest of Punjab. It is a planned city that has kept on growing — industrial phases and IT blocks in the older sectors, pharma and engineering units out along the Derabassi and Lalru belt, warehousing near the airport road, and a steady run of showrooms, offices and commercial buildings through Zirakpur, Kharar and Banur. Much of it is designed by architects, seen from the road, and judged on how it looks.
That changes what has to be got right. On a shed behind a boundary wall nobody studies the ridge cap; on a showroom canopy or an office elevation, the trims, flashings and edge details are the first thing a visitor's eye lands on. DATASHYNE sheets are rolled at our Mandi Gobindgarh plant in PPGI (pre-painted galvanised iron) and PPGL (pre-painted galvalume), and for Mohali projects we quote the trims and flashings alongside the sheet rather than leaving them to be improvised on site. Jindal, JSW, AM/NS India and Indradhanush material is stocked beside our own.
Pre-engineered building fabrication is the firm's other trade, so spans, purlin layouts and connection details are ordinary working ground — useful when an architect's drawing and a fabricator's reality need reconciling. A warehouse on the airport road, a factory bay at Lalru, a showroom front in Zirakpur — send the drawing or the dimensions and the specification comes back written out.
Roofing Sheets We Manufacture & Supply
Five families of sheet from one manufacturer — and on visible buildings, the trims and flashings quoted with them rather than after them.
Colour Coated Sheets — DATASHYNE
Our own manufactured line: metal-coated steel finished in a factory paint system and roll-formed into a rib that performs and presents well.
- Even, factory-applied finish
- Coated steel beneath the colour
- Light on the frame, fast to erect
PPGI Roofing Sheets
Zinc-coated steel under baked paint — the value option, sound over storage, back-of-house buildings and ordinary industrial cover.
- Keeps a large project affordable
- Dependable in normal exposure
- Wide shade selection
PPGL Roofing Sheets
Aluminium-zinc coated steel — longer service life and better heat reflection, which matters on buildings meant to look and perform well for a long time.
- Holds its condition for longer
- Reduces heat into the space below
- For elevations and long-life roofs
Industrial Roofing Sheets
The uprated specification — heavier gauge, better coating, deeper rib — for warehouse spans, plant buildings and roofs carrying services.
- Specified against the drawing
- From our own rolling line
- Warehouses, plants, large units
Metal & Profile Sheets
The wider family — ribbed and trapezoidal profiles for wall cladding, entrance and parking canopies, service enclosures and smaller structures.
- Roof and elevation in one material
- Straightforward for site crews
- Profiles and colours to specify
Brands We Deal In
DATASHYNE from our line, plus Jindal, JSW, AM/NS India and Indradhanush held in stock — all five costed against the same drawing or brief.
Datashyne
Our Own Brand
Jindal
We Deal In
JSW
We Deal In
AM/NS India
We Deal In
Brand availability varies by specification and current stock — tell us your requirement and we'll confirm options across brands with current pricing.
What We Roof & Clad Across Mohali District
Industrial phases, a growing warehouse belt, and a great deal of commercial building the public actually sees.
Production buildings sheeted and clad to the drawing they were designed from.
Distribution buildings roofed for the spans and the traffic they carry.
Frontages where the cladding is the architecture, not a covering over it.
One drawing, one scope — frame, roof and cladding from a single firm.
Farm and storage buildings on the district's rural edges.
Buildings judged from the road, where trims and edge details matter as much as the sheet.
Storage and distribution buildings across the airport road and Derabassi belt.
Manufacturing and assembly sheds through Mohali's established industrial phases.
Process buildings out towards Lalru and Derabassi, where specification is written before it is priced.
Open structures that carry a building's appearance and take weather from every side.
Colour coated cladding used as the face of a building rather than just its cover.
Engineered structure, roofing and cladding delivered as one accountable scope.
Tired roofs replaced and elevations refreshed on buildings still in daily use.
Why Buy From Mahawar Prefab Solutions
Ridge caps, corner and edge flashings, gutters and barge details are priced in the same quotation — not discovered at the end of the job and improvised.
Send an architect's elevation or a fabricator's layout and you get a specification written against it, in the same terms the drawing uses.
We roll what we quote, so coating, gauge, shade and dispatch are settled by the people who control them.
Our name is on every bundle, which keeps consistency across a large order our own responsibility.
Mandi Gobindgarh is close enough for practical delivery into Mohali, with coil at the plant's doorstep.
PPGI and PPGL are both ours to roll, so the recommendation follows the building's exposure and not our stock sheet.
PEB fabrication means spans, purlins and connections are daily work — and one party stays answerable where frame meets sheet.
DATASHYNE with Jindal, JSW, AM/NS India and Indradhanush — specified and priced together for a genuine comparison.
How to Choose the Right Roofing Sheet
On a visible building, the ridge cap, corner flashings, barge boards and gutter line are what the eye reads. Specify them in the same coating and shade as the sheet, and quote them at the start — improvised trims spoil good roofs.
Exposed screws in a straight, evenly spaced line look deliberate; a wandering line looks cheap from fifty feet away. It costs nothing extra — only insistence at the time of fixing.
Colour on an elevation behaves differently from colour on a chart. Look at a sample outdoors, in daylight, against the other materials on the building before committing a whole order to it.
The metallic coating beneath the paint, in grams per square metre, sets the service life. On a building whose appearance is part of its value, buying above the minimum is straightforward economics.
Purlin spacing decides the thickness, and roofs carrying services or maintenance traffic want more. State the layout and the gauge stops being an assumption.
Gutters and downtakes sized for a real cloudburst, positioned where they suit the elevation. On a commercial frontage the drainage is visible too, so it deserves designing rather than adding.
Roof and cladding areas against the 1000 mm each sheet covers, plus overlaps, ridge, flashings, openings and offcuts. Send drawings or dimensions and the count comes back checked.
Where every specification lands eventually. The table sets the two out on what matters for these buildings.
| Factor | PPGI (Galvanised) | PPGL (Galvalume) |
|---|---|---|
| Base coating | Zinc | Aluminium-zinc alloy |
| Corrosion resistance | Good for standard environments | Superior, longer life |
| Heat reflectivity | Moderate | Better — cooler interiors |
| Cost | More economical | Higher, justified by lifespan |
| Best for | Back-of-house sheds, storage, budget work | Elevations, showrooms, warehouses, long life |
Roofing Sheet Price in Mohali — What Builds the Rate
Sheet is priced by weight or covered area over a coil market that resets constantly — and on a finished building the trims belong in the budget too. Six inputs make the number.
Heavier sheet holds more steel and prices accordingly per foot covered.
A high-tensile base costs more than commercial-grade material.
Galvalume sits above galvanised, and richer coating above the minimum in either.
Deeper ribs carry more steel across the same covered area.
Ridge, corner, barge and gutter items are real cost — better budgeted than discovered.
Volume improves the rate; the haul to site adds landed cost over a moving base.
Supplying Mohali, Zirakpur, Kharar & the Derabassi Belt
Mandi Gobindgarh is a short haul from Mohali, which suits both a single commercial job and a phased industrial project. Builders, architects' contractors, fabricators, warehouse developers, plant owners and showroom operators here order DATASHYNE, PPGI and PPGL against drawings and written specifications.
Send the drawing or the dimensions along with the site location, and we will confirm the specification, the trims required and the supply arrangement before anything is committed.
Frequently Asked Questions
Who manufactures roofing sheets supplied in Mohali?
Mahawar Prefab Solutions — DATASHYNE colour coated sheet is rolled at our Mandi Gobindgarh plant, a short haul from Mohali, and supplied across the district including Zirakpur, Kharar, Derabassi and Lalru. PPGI and PPGL are both our own production, four mill brands are stocked with them, and the firm fabricates pre-engineered buildings as its other trade.
What is available for a commercial or industrial project?
Ribbed colour coated sheet for roofing and wall cladding on either a zinc base (PPGI) or an aluminium-zinc base (PPGL), across the usual gauges, profiles and shades, cut to length. For visible buildings the ridge, corner, barge and gutter items are quoted with it, since those details determine how the finished job reads from the road.
Which brands can I compare?
Our own DATASHYNE production plus Jindal, JSW, AM/NS India and Indradhanush from stock. Send one requirement and you receive specification and current rate for all five against the same brief, which is the only way a comparison is meaningful. Availability moves with specification and season and is confirmed against what your project needs.
What is PPGI, and where does it belong on a project?
Pre-painted galvanised iron is steel coated in zinc, factory-painted and roll-formed. On a Mohali project it usually belongs on the back-of-house parts — storage, service structures, sheds behind the building line — where it performs well at the lowest sensible cost. On the parts people see, or where long life is expected, the next answer applies.
When should a project specify PPGL instead?
On elevations, showroom fronts, canopies and any roof intended to hold its condition for a long time. Aluminium-zinc coating outlasts plain zinc appreciably and reflects more heat, which shows on both the maintenance budget and the comfort of the space below. Where a building's appearance is part of its commercial value, the difference in cost is small against the difference in how it ages.
What do roofing sheets cost in Mohali?
The rate is assembled from gauge, coating family and class, profile, shade, trims and flashings, quantity and delivery — sitting on a coil market that changes weekly. Anything published as a fixed figure would mislead you. Send the drawing or the dimensions by WhatsApp or phone and a current, itemised quotation comes back that you can compare properly.
Why do some metal roofs look sharp and others look cheap?
Almost always the detailing rather than the sheet. Ridge caps and flashings in a mismatched colour, trims cut and bent on site, and a wandering line of exposed screws will spoil good material; the same sheet with matching trims and a disciplined fixing line looks like architecture. It costs very little more, but it has to be specified at the start rather than fixed at the end.
Can you quote from an architect's drawing?
Yes, and it is the way we prefer to work on this kind of project. Send the elevation or roof layout and the specification comes back written in the drawing's own terms — profile, gauge, coating class, shade, and the trims each junction needs. Where the drawing and what is practical to fabricate diverge, we will say so before it becomes a site problem.
Can cladding and roofing come in the same material?
They can, and on many Mohali buildings they should. Using the same profile family and shade for the roof and the elevation gives a coherent result and simplifies the trims where the two meet. Where the design calls for contrast instead, the shades can differ while the coating specification stays consistent so both weather at the same rate.
How is gauge decided for a warehouse or plant roof?
By purlin spacing and span first, then by what the roof carries — services, maintenance traffic, or equipment all add to it. State the frame layout and the intended use and two or three suitable gauges come back with the cost difference between them set out, so the decision is made on facts rather than habit.
How do I identify the best roofing sheet suppliers in Mohali?
Four questions cover most of it: does the supplier manufacture or only resell, are both coating families genuinely offered, is coating class written on the quotation, and does the rate track the current coil market. On a project with visible finishes, add a fifth — will they quote the trims and flashings up front? Ask us all five.
Do you supply the building as well as the sheet?
Both routes are normal. Contractors and fabricators buy sheets and trims for frames they are erecting; developers and owners who want one accountable party take the complete pre-engineered building — structure, roofing and cladding in a single scope. On projects where appearance matters, the single-scope route avoids the gaps that show up where two suppliers meet.
Roofing or Cladding a Project in Mohali?
Send the drawing or the dimensions, the coating you have in mind and the site location. What comes back covers sheet, trims and flashings, specified properly and priced at today's rate.