Sri Muktsar Sahib · Punjab · India
C & Z Purlin Manufacturer in Sri Muktsar Sahib
Mahawar Prefab Solutions (MPS) rolls C purlins and Z purlins in HR, galvanised (GI) and colour coated steel and supplies them in Sri Muktsar Sahib, Punjab. Sections 125 to 250 mm deep in 1.2 to 3.0 mm steel, cut to your length and punched to your drawing, delivered to your site.
Purlins in Sri Muktsar Sahib
C & Z purlins for the Muktsar cotton belt
Sri Muktsar Sahib works to the rhythm of cotton and grain. Ginning and pressing units run through the picking season, the mandis at Malout, Gidderbaha and the town take in wheat, paddy and cotton in turn, and citrus orchards spread across the Malout side.
Parts of the district have a high water table and the ground stays wet in a rainy year, so buildings here are raised and their steel has to resist damp from below as well as above. We roll C and Z purlins in GI for exactly that.
Roof purlinWall purlin (girt)
Inside a PEB warehouse
White roof purlinWhite purlins on the rafters
Wall purlin (girt)Wall purlins behind the wall sheetsWhat we supply in Sri Muktsar Sahib
C purlins and Z purlins, rolled to your drawing
Both sections come off the same line in the same sizes. The shape decides where each one works best. Compare C and Z in detail.
C purlinALSO CALLED CEE PURLIN OR C SECTION
Both flanges turn the same way, so one face is flat. It is simple to fix and easy to frame around doors and windows. C purlins meet end to end on a cleat; they are not overlapped.
- Wall girts
- Shorter roof spans
- Door and window framing
- Eave struts
- Mezzanine joists
Z purlinALSO CALLED ZED PURLIN OR Z SECTION
The flanges turn opposite ways, so two Z purlins nest into each other and can be overlapped (lapped) over a rafter. The lap makes the purlin continuous over its supports, so it carries more load for the same weight of steel.
- Roofs of PEB buildings
- Larger bays
- Continuous spans
- Walls of tall sheds
Three finishes
HR, GI or colour coated: which purlin for Sri Muktsar Sahib?
The section and the sizes are the same. What changes is the steel it is rolled from, and how well that steel stands up to rust.
HR purlinHOT ROLLED (MS), BLACK
Rolled from hot-rolled steel strip as it comes from the mill: a dark grey-black surface with no coating.
- The lowest price of the three
- Needs primer and paint to keep rust away
- For dry, covered buildings and for steel that will be painted anyway
GI purlinGALVANISED
Rolled from galvanised steel: a zinc coating of 80 to 275 GSM on both faces of the strip.
- No painting needed at site
- The zinc goes on protecting the steel at small scratches and cut ends
- For PEB buildings, factory sheds, warehouses and solar structures
Colour coated purlinWHITE
Rolled from galvanised steel with a factory-baked paint coat over the zinc. The colour is white.
- Two layers of protection: zinc, then paint
- A clean white finish that brightens the inside of the building
- For buildings where the roof steel stays on view, and for humid or corrosive sites
In Sri Muktsar Sahib: Water-logged ground and salty soil in parts of the district are hard on steel. GI purlins with a good zinc coating are the right choice; avoid unpainted HR.
Steel brands available with us
Tell us the make you prefer when you send your list.
Sizes and weight
C & Z purlin weight chart
Weight in kg per running metre for the common sizes. A C purlin and a Z purlin of the same size weigh the same. For any other size, use the purlin weight calculator.
Purlin weight per metre (kg/m)
Size is depth × flange × lip in mm
| C or Z purlin size | 1.2 mm | 1.5 mm | 1.8 mm | 2.0 mm | 2.5 mm | 3.0 mm |
|---|---|---|---|---|---|---|
| 125 × 50 × 15strip about 240 mm | 2.32 | 2.87 | 3.41 | 3.77 | 4.64 | 5.48 |
| 150 × 50 × 15strip about 265 mm | 2.55 | 3.17 | 3.77 | 4.16 | 5.13 | 6.07 |
| 175 × 60 × 20strip about 320 mm | 3.07 | 3.81 | 4.54 | 5.03 | 6.21 | 7.36 |
| 200 × 60 × 20strip about 345 mm | 3.31 | 4.11 | 4.90 | 5.42 | 6.70 | 7.95 |
| 225 × 75 × 20strip about 400 mm | 3.83 | 4.76 | 5.67 | 6.28 | 7.78 | 9.25 |
| 250 × 75 × 20strip about 425 mm | 4.06 | 5.05 | 6.03 | 6.67 | 8.27 | 9.84 |
Calculated weight = strip width × thickness × 7.85 (the density of steel), taking the inside bend radius as 1.5 times the thickness. Actual weight varies a little with the coil’s thickness tolerance and zinc coating. The flange and lip sizes shown are the common ones; we roll to the sizes in your drawing. To get the weight of one purlin, multiply by its length in metres.
Why sheds moved to purlins
Purlin vs MS channel vs MS tube: half the weight
Many sheds in Sri Muktsar Sahib still carry their sheets on MS channels or MS tubes. A roll-formed C or Z purlin of about the same stiffness needs less than half the steel, so you buy fewer kilos and the building carries a lighter roof.
C or Z purlin
Z 200 × 60 × 20 × 2.0 mm
5.42 kg per metre
Thin strip, deep section
The steel sits where it works: a deep web, two flanges and a stiffening lip on each.
MS channel
ISMC 125 × 65 mm
12.7 kg per metre
2.3 times the weight of the purlin
Hot-rolled, with a thick web and thick flanges. Strong, but a roof purlin does not need most of that steel.
MS tube
Rectangular tube 145 × 82 × 4.0 mm
13.4 kg per metre
2.5 times the weight of the purlin
A closed box with four walls, so there is steel on every side, needed or not.
All three are drawn to the same scale and have about the same stiffness (Ixx 404, 416 and 476 cm⁴).
Want the full comparison? Three size steps, what 1,000 metres of purlin weighs in each, and how the sizes were matched: purlin vs MS channel vs MS tube.
Applications
Where C and Z purlins are used in Sri Muktsar Sahib
Wherever a sheet has to be fixed to a steel frame, there is a purlin or a wall purlin (girt) behind it.
Sheets for the same roof: roofing sheets in Sri Muktsar Sahib.
Price and ordering
Purlin price in Sri Muktsar Sahib: what decides it
Purlins are sold by weight. The rate per kg moves with the price of steel coil, so we quote the day’s rate against your list, with transport to Sri Muktsar Sahib.
What to send for a quick quote
- Section: C or Z
- Size: depth × flange × lip, for example 200 × 60 × 20 mm
- Thickness: for example 2.0 mm
- Lengths and quantities
- Finish: HR, GI or colour coated white
- Holes: a drawing or sketch with the hole positions
- Site: where in Sri Muktsar Sahib the material is going
Not sure of the weight? Use the purlin weight calculator.
Areas served
Purlin supply in Sri Muktsar Sahib and nearby
Fabricators, contractors, PEB builders and shed owners in and around Sri Muktsar Sahib order C and Z purlins from us against their drawings. We deliver to:
- Muktsar Town
- Malout
- Gidderbaha
- Lambi
- Doda
- Bariwala
- Kabarwala
- Bathinda Road
- Kotkapura Road
Not on the list? We supply purlins across India. Send your site location and we will confirm the delivery.
FAQ
Purlins in Sri Muktsar Sahib: questions, answered
Still have a question? Ask us on WhatsApp and our team will answer.
Do you supply C and Z purlins in Sri Muktsar Sahib?
Yes. Mahawar Prefab Solutions rolls C and Z purlins on its own line and delivers them by road to Sri Muktsar Sahib and nearby, including Muktsar Town, Malout, Gidderbaha, Lambi, Doda, Bariwala. Send your section, thickness, lengths and quantities on WhatsApp and we will confirm the supply to your site.
What is the price of C and Z purlins in Sri Muktsar Sahib?
Purlins are sold by weight, so the price in Sri Muktsar Sahib is the total weight of your order multiplied by the day's rate per kg, plus transport to your site. The rate moves with the price of steel coil and differs for HR, GI and colour coated purlins. Send your list and we will reply with today's price.
Which purlin finish suits Sri Muktsar Sahib: HR, GI or colour coated?
Water-logged ground and salty soil in parts of the district are hard on steel. GI purlins with a good zinc coating are the right choice; avoid unpainted HR. HR purlins cost the least but need primer and paint.
What is the weight of a Z purlin per metre?
It depends on the size and thickness. A Z purlin 200 × 60 × 20 mm weighs about 5.42 kg per metre in 2.0 mm steel and about 6.70 kg in 2.5 mm; a C purlin of the same size weighs the same. The weight chart on this page lists the common sizes.
Is a purlin lighter than an MS channel or an MS tube?
Yes. For about the same stiffness a Z purlin 200 × 60 × 20 × 2.0 mm weighs about 5.42 kg per metre, an ISMC 125 channel about 12.7 kg and a 145 × 82 × 4.0 mm tube about 13.4 kg, so the channel and the tube need roughly two to two and a half times the steel.
What sizes of purlins do you make?
C and Z purlins from 125 mm to 250 mm deep, in thicknesses from 1.2 mm to 3.0 mm, cut to the length you ask for and punched to your drawing. Tell us the flange and lip sizes in your drawing and we will confirm them.
What should the purlin spacing be?
Spacing depends on the roofing sheet, the roof slope and the wind and snow loads at the site. On most sheds with 0.45 to 0.50 mm colour coated sheets, purlins sit about 1.0 to 1.5 m apart; heavier loads need closer purlins. Always follow the spacing in your structural drawing.
Which steel brands are available for purlins in Sri Muktsar Sahib?
Purlins are available in steel from Tata, AM/NS India, Madhav, APL Apollo and JSW. Tell us the make you prefer when you send your list.
Related pages
Get a price
Get today’s purlin price in Sri Muktsar Sahib
Send your section, thickness, lengths and quantities. We will reply with the weight, the day’s rate and the delivery cost to your site.






