Roofing Sheet
Manufacturer in
Faridkot
DATASHYNE colour coated sheets in PPGI and PPGL for dairy sheds, cold stores, mandi godowns and workshops across Faridkot — one shed's worth or a full order, quoted the same way.
Metal Roofing Sheets for Faridkot's Farms, Mandis & Workshops
Faridkot is farming country before it is anything else. The mandis at Kotkapura and Jaitu take in wheat and cotton season after season, cold stores hold produce between harvest and market, dairies keep cattle under cover the year round, and implement workshops keep the tractors of half the district running. Faridkot town itself, with its hospital and university campuses, adds the commercial building work on top.
Buildings like these rarely come with an engineer attached, which is where most of our conversations with this district begin — a farmer, a dairy owner or a small unit describing what they want covered. DATASHYNE sheets are rolled at our Mandi Gobindgarh plant in PPGI (pre-painted galvanised iron) and PPGL (pre-painted galvalume), and Jindal, JSW, AM/NS India and Indradhanush material is stocked beside them. What you get from us is a specification worked out for your shed, and a rate for it, whether the order is twenty sheets or two hundred.
We also fabricate pre-engineered buildings, so questions about spans, purlin spacing and how a roof holds down in open-country wind are ordinary work here rather than something we refer elsewhere. Putting up a new cattle shed or pulling old sheets off a godown — describe it and we will tell you what it actually needs.
Roofing Sheets We Manufacture & Supply
Five kinds of sheet, all from our own plant or our own stock — explained in plain terms, because most buyers here are choosing a roof, not reading a datasheet.
Colour Coated Sheets — DATASHYNE
The sheet we make ourselves: steel given a protective metal coat, painted at the works and rolled into ribs that carry rain off quickly.
- Holds its colour for years
- Protected beneath the paint
- Light to lift, quick to fix
PPGI Roofing Sheets
Zinc-coated steel with a painted finish — the everyday choice, and the right one for a great many sheds in this district.
- Kindest on the budget
- Perfectly sound in ordinary conditions
- Good spread of colours
PPGL Roofing Sheets
Aluminium-zinc coating instead of plain zinc. It lasts longer where moisture sits and reflects more heat — which matters over cattle and cold storage.
- Stands up to damp air longer
- Keeps the space below cooler
- Our pick for dairy and cold stores
Industrial Roofing Sheets
Stepped-up specification for bigger buildings: heavier gauge, better coating, deeper rib, sized for long spans and continuous use.
- Chosen for the conditions inside
- Off our own rolling line
- Cold stores, processing units, big godowns
Metal & Profile Sheets
All the ordinary profiles — trapezoidal and ribbed sheet for tractor sheds, tubewell rooms, canopies, side walls and everything similar.
- Same sheet works on roof or wall
- No specialist labour needed
- Choice of rib and shade
Brands We Deal In
DATASHYNE comes off our line; Jindal, JSW, AM/NS India and Indradhanush sit in our stock. Ask once and you hear about all five.
Datashyne
Our Own Brand
Jindal
We Deal In
JSW
We Deal In
AM/NS India
We Deal In
Brand availability varies by specification and current stock — tell us your requirement and we'll confirm options across brands with current pricing.
The Buildings We Roof Around Faridkot
Most roofs in this district cover crops, cattle or machinery — and each of those wants something slightly different overhead.
Working sheds covered end to end in colour coated roof and side sheet.
Godowns that keep a season of stock dry from procurement to dispatch.
Town-side shops and showrooms where the cladding has to look right.
Frame, roof and walls designed together and put up as one job.
Cattle sheds, tractor sheds and farm stores built to last on open land.
Warm, damp air rises off livestock all day — the underside of the roof is what suffers first.
Covered storage at Kotkapura, Jaitu and the smaller purchase centres through procurement season.
Produce buildings where insulation, sealing and coating class all pull in the same direction.
Tractor and machinery repair sheds serving farms across the district.
The small utility structures every farm needs, out where the wind arrives unbroken.
Shops, showrooms and roadside builds around Faridkot town and Kotkapura.
Engineered sheds supplied complete by the people who fabricate them.
Taking down tired chadar and cement sheets, putting colour coated up in their place.
Why Buy From Mahawar Prefab Solutions
The sheet is rolled by us, so questions about coating, gauge or dispatch get answered by people who can actually decide.
Every DATASHYNE bundle carries our brand, which is the plainest reason we keep the specification honest.
Punjab's steel town is where our plant sits — raw material close at hand, and a route down to the Malwa districts we use often.
Twenty sheets for a tubewell room get the same specification effort as a full godown order. Small buyers are not an inconvenience here.
We roll galvanised and galvalume alike, so what we recommend depends on your shed rather than on what needs clearing from stock.
An established steel trading arm works alongside the plant, so grades, quality and market direction are known first-hand.
PEB fabrication means we can talk through spans, purlins and wind fixing — the parts that decide whether a farm roof stays put.
DATASHYNE from our line plus Jindal, JSW, AM/NS India and Indradhanush from stock — laid out together on specification and rate.
How to Choose the Right Roofing Sheet
Purlin spacing sets the gauge, and on open farmland wind lifting at the sheet matters more than anyone walking on it. Stretch the purlins and you need more sheet.
Under the paint lies the metal that does the protecting, measured in grams per square metre. Over cattle or produce, buy more of it than the minimum.
Deeper ribs clear water faster and cross wider gaps between purlins. Adding to a shed you already have? Bring the old profile details along.
Cattle, cold-stored produce, grain and machinery each treat a roof differently. The animals and the crop should decide the specification, not the building's name.
The point most buyers miss: in a cattle shed or cold store, the attack comes from inside — warm damp air condensing on the underside. Ventilation and coating class both answer it.
Right screws, right washers, generous laps, sealed cut edges. On exposed farm sites the fixing detail is what keeps the roof on when the wind gets up.
Roof area divided by 1000 mm of effective cover per sheet, plus overlaps, ridge, flashings and a little wastage. Give us the shed size and we will do the arithmetic.
The choice every buyer arrives at. For sheds holding livestock or produce, the table below leans one way.
| Factor | PPGI (Galvanised) | PPGL (Galvalume) |
|---|---|---|
| Base coating | Zinc | Aluminium-zinc alloy |
| Corrosion resistance | Good for standard environments | Superior, longer life |
| Heat reflectivity | Moderate | Better — cooler interiors |
| Cost | More economical | Higher, justified by lifespan |
| Best for | Tractor sheds, workshops, dry storage | Cattle sheds, cold stores, long-life roofs |
What a Roofing Sheet Costs in Faridkot — and Why
Sheet sells by weight or by the area it covers, and the underlying coil rate never sits still for long. Six things build the figure you are quoted.
A heavier sheet holds more steel, so it costs more for the same covered area.
Higher-strength base material carries a premium over the standard grade.
Galvalume prices above galvanised, and a heavier coating class lifts either one.
Deeper ribs consume more steel to cover the same roof.
Bigger orders bring the per-sheet rate down.
Distance to your village or town adds to landed cost, and the coil market resets the base rate week after week.
Reaching Faridkot Town, Kotkapura & the Villages Between
Our plant at Mandi Gobindgarh sends material down into the Malwa districts regularly, so reaching Faridkot is routine rather than an exception. Farmers, dairy owners, mandi traders, cold store operators, fabricators and contractors here order DATASHYNE, PPGI and PPGL against whatever they are building — and a single shed's requirement is a perfectly normal order.
Tell us the village or town and what you are covering, and we will confirm how the material reaches you before you commit to anything.
Frequently Asked Questions
Who makes roofing sheets available in Faridkot?
Mahawar Prefab Solutions rolls DATASHYNE colour coated sheets at its Mandi Gobindgarh plant and sends material into Faridkot district regularly — the town, Kotkapura, Jaitu and the villages around them. Both galvanised and galvalume sheets come off our own line, four mill brands sit in stock beside them, and PEB fabrication is the other half of what we do.
What sheet options do I actually have?
Colour coated ribbed sheet in two coating families — PPGI over zinc, PPGL over aluminium-zinc — available in a range of gauges, shades and profiles for roofs and side walls. Which combination suits you depends on what the building holds. Tell us whether it is cattle, produce, grain or machinery and the choice narrows quickly.
Do you stock brands other than your own?
Yes — Jindal, JSW, AM/NS India and Indradhanush colour coated material is held alongside our own DATASHYNE production. Buyers loyal to a particular mill can have it; the undecided get the specifications and current rates for all five in one go. Availability depends on the specification asked for, so start by telling us the requirement.
Will you supply a small order, or only bulk?
Small orders are welcome and are quoted with the same care as large ones. A tubewell room, a tractor shed or a single cattle byre is an ordinary enquiry for us, not a nuisance. You get the specification worked out properly and a straight rate — the quantity does not change how seriously the job is treated.
What is PPGI, in plain language?
Steel coated with zinc so it does not rust, painted at the factory, then pressed into ribs. That is pre-painted galvanised iron, and it is the sheet on most ordinary sheds in Punjab. For a tractor shed, a workshop or dry storage, it does the job at the lowest sensible price and there is no reason to spend more.
Why do you recommend PPGL for cattle sheds and cold stores?
Because in those buildings the damage starts underneath. Warm, damp air from livestock or refrigerated produce condenses on the underside of the roof and works away at it quietly for years. Galvalume's aluminium-zinc coating handles that far better than plain zinc, and it reflects more summer heat as well — worth the premium over a shed you want to leave alone for a long time.
What will sheets cost me?
There is no fixed price to publish — colour coated rates move with the steel coil market. Your figure comes from gauge, coating type and class, profile, colour, quantity and the delivery point. Send those details on WhatsApp or call, and you will get a current rate for exactly what you asked about rather than a general estimate.
What should a mandi godown roof be made of?
Water-tightness first: correct overlaps, a profile that drains properly, and a gauge suited to your purlin spacing. Grain sitting through humid weeks makes coating class worth raising too. Send the godown's dimensions and purlin layout — or photographs with measurements — and we will confirm a specification and the sheet count before you order.
Can old sheets be replaced on an existing shed?
Replacing worn chadar is routine work across this district. Before ordering, note the existing profile and the spacing of the purlins, or send photographs with a measurement or two, so the new sheets sit correctly on the frame already standing. Since you are paying for the labour anyway, it is also the sensible moment to improve the coating class.
Which thickness suits a farm shed?
Out on open land, wind lifting at the roof usually decides it rather than weight on top. Wider purlin spacing and an unsheltered site both push toward a heavier gauge, and the fixing detail matters as much as the sheet itself. Describe the site and the frame and we will suggest a gauge with the cost difference explained.
How should I judge roofing sheet suppliers in Faridkot?
Four questions cut through it: does the supplier manufacture or only resell, are both coating types genuinely available, will the coating class be written on the quotation, and is the rate current with the coil market? Any supplier worth buying from will answer all four without hesitation. Ask us the same and compare the answers.
Do you supply complete buildings too?
Both ways work. Sheets can go to your own mistri or fabricator, or Mahawar Prefab Solutions can supply the whole pre-engineered building — frame, roofing and cladding together. Even when the order is sheets alone, the advice takes account of what they will be fixed to, because good sheet on a badly built frame is still a roof that fails.
Covering a Cattle Shed, Godown or Workshop?
Tell us the size of the shed, roughly how many sheets you think you need, and where in the district it stands. We will come back with a specification and a current rate — however small the job.