We understand better that enim ad minim veniam, consectetur adipis cing elit, sed do

Kargil · Ladakh · India

SRT Sheet Manufacturer in Kargil

Mahawar Prefab Solutions (MPS) makes SRT sheets (steel roofing troughs) to IS 1079 and delivers them to Kargil and across Ladakh: 613 × 180 mm troughs in 2.0 or 2.5 mm steel, cut to length and punched for 12 mm bolts, in nested bundles that make the most of every truck.

613 × 180 mm trough2.0 or 2.5 mm steelDelivered in Kargil
SRT sheets (steel roofing troughs) nested in a bundle at the Mahawar Prefab Solutions works
SRTs nested in a bundle at our works
613 × 180 mmwidth × depth of the trough
2.0–2.5 mmhot rolled steel to IS 1079
1270–3050 mmlengths, others made to order
Ø14 mmholes for 12 mm bolts, 36 on a 1700 mm SRT

SRT sheets in Kargil

SRT sheets for Kargil, Drass and Zanskar

Kargil sits on the Srinagar–Leh highway, between Zoji La and the Ladakh plateau. Drass, just down the road, has some of the coldest winters anywhere in India, and snow closes the road over Zoji La for months at a time.

Roofs here carry snow and earth, and the steel for them has to arrive before the passes close. We supply SRTs cut to length and punched, in nested bundles, so a whole roof of troughs travels in a small space and bolts together at site.

Who we are. MPS is part of Mahawar Group, in the iron and steel trade since 1990. We cut, punch and fold SRTs at our own works, and we also make PEB buildings, C and Z purlins and roofing sheets, delivered to Kargil and across India. More about our SRT sheets.
Three SRT sheets seen from above: flanges and base punched with holes for 12 mm boltsFlange holesBase end holesSRTs punched and folded at our works
A steel sheet punched with bolt holes, ready to be folded into an SRTHoles punched before foldingA punched sheet, ready to fold

In 3D · 360°

Every dimension and every hole, in 3D

Turn the SRT all the way round, 360°, even underneath: drag it with your mouse or finger, or press “360°” and watch it turn. Pick a length, thickness and finish, look at the end profile, the holes at each end and the zig-zag holes along the flanges, and point at any hole to see exactly where it is.

3D model of an SRT sheet 1700 mm long, 613 mm wide and 180 mm deep, with its bolt holes

Sizes and weight

SRT sheet sizes and weight in Kargil

The trough is the same for every length: 613 mm wide and 180 mm deep. Weights are worked out from the folded shape: 914 mm of steel across, × length × thickness × 7.85.

Overall width613 mmOutside the two flanges.
Depth180 mmFrom the base to the top of the flanges.
Flanges and base175 + 203 + 175 mmThe walls lean out 30 mm so the troughs nest.
Thickness2.0 or 2.5 mmHot rolled carbon steel to IS 1079.
Lengths1270 to 3050 mm1270, 1630, 1700, 2400 and 3050 mm; others to order.
HolesØ14 mmFor 12 mm bolts, punched before folding.
Weight per metre14.35 kgIn 2.0 mm steel (17.92 kg in 2.5 mm).
FinishBare or paintedAs rolled, or red oxide primer and enamel.

Weight of one SRT (kg)

613 × 180 mm trough

Length2.0 mm2.5 mmHoles
1270 mm4.2 ft18.222.832
1630 mm5.3 ft23.429.236
1700 mm5.6 ft24.430.536
2400 mm7.9 ft34.443.040
3050 mm10.0 ft43.854.746

Calculated weights of the bare steel, without paint or bolts. The actual weight varies a little with the steel’s thickness tolerance. If your tender gives a weight per SRT, send it with your list and we will confirm the weight before we cut. Weight of an order = weight of one SRT × number of pieces.

Holes

Where the holes are

All holes are Ø14 mm, for 12 mm bolts, punched while the sheet is still flat. The pattern is the same when the SRT is turned end for end, so it can be laid either way round. Below: a 1700 mm SRT seen from above.

1700 mm401003510535454545103140284284284284284140Flange (175 mm)Base (203 mm)Flange (175 mm)1700 mm401003510535454545103140284284284284284140Flange (175 mm)Base (203 mm)Flange (175 mm)

All holes Ø14 mm, for 12 mm bolts · 36 holes on a 1700 mm SRT · sizes in mm · the darker strips are the two sloping walls, seen from above

Flange end holes2 × 2 in each flange at each end: 40 and 140 mm from the end, 35 mm in from either edge of the flange.
Base end holes2 × 3 in the base at each end: 45, 90, 135 mm from the end, 103 mm apart across the base.
Zig-zag flange holesEvenly spaced between the end groups, alternating between the flange’s two hole lines. On each flange: 2 on a 1270 mm SRT, 4 on 1630 and 1700 mm, 6 on 2400 mm and 9 on 3050 mm.
Bolt kitTenders usually ask for 16 bolts per SRT: 12 × 40 mm, each with a nut and two washers (30 mm across, 3 mm thick). Tell us if you need them.

Delivery to Kargil

SRT sheets delivered to Kargil

Bundled at our works and sent by road to Kargil or straight to your site.

Nested bundlesEach SRT sits about 12 mm above the one below, so a bundle of 40 stands only about 649 mm tall and weighs about 980 kg (1700 mm × 2.0 mm).
Painted or bareKargil and Drass get heavy snow and very low winter temperatures. Ask for primed and painted SRTs, and plan the roof’s beam spacing for the load of snow and earth it will carry.
The roadThe road over Zoji La closes for several months each winter, cutting Kargil off from Srinagar. Order early in the season so the SRTs reach your site while it is open.

Areas served

SRT supply in Kargil and nearby

Contractors, fabricators and buyers in and around Kargil order SRT sheets from us against their list or tender. We deliver to:

  • Kargil
  • Drass
  • Sankoo
  • Shargol
  • Mulbekh
  • Trespone
  • Suru valley
  • Padum (Zanskar)

Not on the list? We supply SRT sheets across India. Send your site location and we will confirm the delivery.

FAQ

SRT sheets in Kargil: questions, answered

Still have a question? Ask us on WhatsApp and our team will answer.

Do you supply SRT sheets in Kargil?

Yes. Mahawar Prefab Solutions makes SRT sheets and delivers them by road to Kargil and nearby, including Drass, Sankoo, Shargol, Mulbekh. Send your list on WhatsApp and we will confirm the supply.

When should SRT sheets for Kargil be ordered?

The road over Zoji La closes for several months each winter, cutting Kargil off from Srinagar. Order early in the season so the SRTs reach your site while it is open.

What is the price of SRT sheets in Kargil?

SRTs are priced per piece, from the weight of steel in them and the day’s steel rate, plus transport to Kargil. Send the size, thickness, quantity and finish for today’s price.

What is the full form of SRT sheet?

SRT stands for Steel Roofing Trough. Tenders often write it as “Steel Roofing Through” sheet. It is a hot rolled steel sheet folded into a deep trough, 613 mm wide and 180 mm deep, with a flange on each side and holes for 12 mm bolts.

What is the size of an SRT sheet?

The trough is 613 mm wide and 180 mm deep: two 175 mm flanges and a 203 mm base. Common lengths are 1270, 1630, 1700, 2400 and 3050 mm, and other lengths are made to order. The usual thickness is 2.0 mm; 2.5 mm is also made.

What is the weight of an SRT sheet?

It depends on the length and thickness. In 2.0 mm steel an SRT weighs about 14.35 kg per metre: about 24.4 kg for a 1700 mm SRT and about 34.4 kg for 2400 mm. A 3050 mm SRT in 2.5 mm steel weighs about 54.7 kg. The weight table on this page lists every size.

How many holes does an SRT have, and for which bolts?

A 1700 mm SRT has 36 holes of Ø14 mm, for 12 mm bolts: 2 × 2 in each flange and 2 × 3 in the base at each end, and 4 zig-zag holes along each flange. Tenders usually ask for 16 bolts per SRT, 12 × 40 mm, each with a nut and two washers.

What is an SRT sheet used for?

Mostly for the roofs of bunkers. SRTs are laid side by side over ISMB steel beams, bolted in place and covered with earth, with a layer of LDPE film in the earth cover.

How are SRT sheets packed and transported?

They nest inside each other: each SRT sits about 12 mm above the one below, so 40 SRTs make a bundle only about 649 mm tall. Bundles go by road to your site.

Get a price

Get today’s price for SRT sheets in Kargil

Send the size, thickness, quantity and finish, or the item from your tender. We will reply with the price per SRT and the delivery cost to your site.

Share and Enjoy !

Shares
Shares