We understand better that enim ad minim veniam, consectetur adipis cing elit, sed do

Greater Noida · Uttar Pradesh · India

C & Z Purlin Manufacturer in Greater Noida

Mahawar Prefab Solutions (MPS) rolls C purlins and Z purlins in HR, galvanised (GI) and colour coated steel and supplies them in Greater Noida, Uttar Pradesh. Sections 125 to 250 mm deep in 1.2 to 3.0 mm steel, cut to your length and punched to your drawing, delivered to your site.

C (Cee) and Z (Zed) sectionsHR, GI or colour coatedDelivered in Greater Noida
125–250 mmsection depth (web)
1.2–3.0 mmsteel thickness
80–275 GSMzinc coating on GI purlins
C & Zcut to length and punched to your drawing

Purlins in Greater Noida

C & Z purlins for Greater Noida’s plants

Greater Noida has the space Noida ran out of. Electronics and mobile-phone plants, automobile and appliance makers stand in Ecotech, Surajpur and Kasna, with a container depot at Dadri and new industrial sectors along the Yamuna Expressway.

These are large, engineered buildings with lapped Z purlins over wide bays. We roll them to the structural consultant’s sections and lengths, cut and punched, in GI or colour coated steel.

Who we are. MPS is part of Mahawar Group, in the iron and steel trade since 1990. We roll C and Z purlins on our own line for the PEB buildings we design and erect, and we supply the same purlins to fabricators, contractors and shed owners in Greater Noida and across India. More about our C and Z purlins.
Columns, rafters and purlins inside a PEB warehouse Roof purlinWall purlin (girt) Inside a PEB warehouse
White roof purlins fixed on the rafters of a PEB building before the roofing sheets are laidWhite roof purlinWhite purlins on the rafters
Wall purlins (girts) between the columns of a PEB building, carrying the wall sheetsWall purlin (girt)Wall purlins behind the wall sheets

What we supply in Greater Noida

C purlins and Z purlins, rolled to your drawing

Both sections come off the same line in the same sizes. The shape decides where each one works best. Compare C and Z in detail.

DBLt

C purlinALSO CALLED CEE PURLIN OR C SECTION

Both flanges turn the same way, so one face is flat. It is simple to fix and easy to frame around doors and windows. C purlins meet end to end on a cleat; they are not overlapped.

  • Wall girts
  • Shorter roof spans
  • Door and window framing
  • Eave struts
  • Mezzanine joists
DBLt

Z purlinALSO CALLED ZED PURLIN OR Z SECTION

The flanges turn opposite ways, so two Z purlins nest into each other and can be overlapped (lapped) over a rafter. The lap makes the purlin continuous over its supports, so it carries more load for the same weight of steel.

  • Roofs of PEB buildings
  • Larger bays
  • Continuous spans
  • Walls of tall sheds
SectionsC (Cee) and Z (Zed)With a stiffening lip on each flange.
Depth (web)125 to 250 mmCommon: 125, 150, 175, 200, 225 and 250 mm.
Thickness1.2 to 3.0 mmCommon: 1.5, 2.0 and 2.5 mm.
SteelHR, GI or colour coatedGrade E250 to E350; zinc 80 to 275 GSM on GI.
Length and holesTo your drawingCut to length and punched on the line.
DeliveryTo your site in Greater NoidaBundled and sent by road.

Three finishes

HR, GI or colour coated: which purlin for Greater Noida?

The section and the sizes are the same. What changes is the steel it is rolled from, and how well that steel stands up to rust.

Economical Steel only

HR purlinHOT ROLLED (MS), BLACK

Rolled from hot-rolled steel strip as it comes from the mill: a dark grey-black surface with no coating.

  • The lowest price of the three
  • Needs primer and paint to keep rust away
  • For dry, covered buildings and for steel that will be painted anyway
Rust protected Zinc Steel Zinc

GI purlinGALVANISED

Rolled from galvanised steel: a zinc coating of 80 to 275 GSM on both faces of the strip.

  • No painting needed at site
  • The zinc goes on protecting the steel at small scratches and cut ends
  • For PEB buildings, factory sheds, warehouses and solar structures
Best of the three White paint Zinc Steel

Colour coated purlinWHITE

Rolled from galvanised steel with a factory-baked paint coat over the zinc. The colour is white.

  • Two layers of protection: zinc, then paint
  • A clean white finish that brightens the inside of the building
  • For buildings where the roof steel stays on view, and for humid or corrosive sites

In Greater Noida: Open land means strong winds and dust, with summer heat and a humid monsoon. GI purlins are standard; laps and spacing must follow the design.

Sizes and weight

C & Z purlin weight chart

Weight in kg per running metre for the common sizes. A C purlin and a Z purlin of the same size weigh the same. For any other size, use the purlin weight calculator.

Purlin weight per metre (kg/m)

Size is depth × flange × lip in mm

C or Z purlin size1.2 mm1.5 mm1.8 mm2.0 mm2.5 mm3.0 mm
125 × 50 × 15strip about 240 mm2.322.873.413.774.645.48
150 × 50 × 15strip about 265 mm2.553.173.774.165.136.07
175 × 60 × 20strip about 320 mm3.073.814.545.036.217.36
200 × 60 × 20strip about 345 mm3.314.114.905.426.707.95
225 × 75 × 20strip about 400 mm3.834.765.676.287.789.25
250 × 75 × 20strip about 425 mm4.065.056.036.678.279.84

Calculated weight = strip width × thickness × 7.85 (the density of steel), taking the inside bend radius as 1.5 times the thickness. Actual weight varies a little with the coil’s thickness tolerance and zinc coating. The flange and lip sizes shown are the common ones; we roll to the sizes in your drawing. To get the weight of one purlin, multiply by its length in metres.

Why sheds moved to purlins

Purlin vs MS channel vs MS tube: half the weight

Many sheds in Greater Noida still carry their sheets on MS channels or MS tubes. A roll-formed C or Z purlin of about the same stiffness needs less than half the steel, so you buy fewer kilos and the building carries a lighter roof.

Lightest 200 mm

C or Z purlin

Z 200 × 60 × 20 × 2.0 mm

5.42 kg per metre

Thin strip, deep section

The steel sits where it works: a deep web, two flanges and a stiffening lip on each.

MS channel 125 mm

MS channel

ISMC 125 × 65 mm

12.7 kg per metre

2.3 times the weight of the purlin

Hot-rolled, with a thick web and thick flanges. Strong, but a roof purlin does not need most of that steel.

MS tube 145 mm

MS tube

Rectangular tube 145 × 82 × 4.0 mm

13.4 kg per metre

2.5 times the weight of the purlin

A closed box with four walls, so there is steel on every side, needed or not.

All three are drawn to the same scale and have about the same stiffness (Ixx 404, 416 and 476 cm⁴).

Want the full comparison? Three size steps, what 1,000 metres of purlin weighs in each, and how the sizes were matched: purlin vs MS channel vs MS tube.

Applications

Where C and Z purlins are used in Greater Noida

Wherever a sheet has to be fixed to a steel frame, there is a purlin or a wall purlin (girt) behind it.

Electronics and appliance plantsClean, insulated roofs on lapped Z purlins.
Auto and engineering plantsProduction bays in Ecotech and Surajpur.
Warehouses and logistics parksLong clear-span roofs near Dadri and the expressways.
Supplier unitsSheds, mezzanines and extensions at Kasna and Site IV and V.

Sheets for the same roof: roofing sheets in Greater Noida.

Price and ordering

Purlin price in Greater Noida: what decides it

Purlins are sold by weight. The rate per kg moves with the price of steel coil, so we quote the day’s rate against your list, with transport to Greater Noida.

Weight of the sectionDeeper and thicker purlins weigh more per metre. The weight chart above shows how much.
FinishHR costs the least, GI sits in the middle and colour coated costs the most.
Zinc coating and gradeA heavier zinc coating or a higher-strength grade adds to the rate.
Brand of steelRates differ a little between makes. Tell us the brand you prefer.
QuantityA full truck load works out cheaper per kg than a small lot.
Transport to Greater NoidaThe delivery cost depends on your site and the lengths ordered.

What to send for a quick quote

  • Section: C or Z
  • Size: depth × flange × lip, for example 200 × 60 × 20 mm
  • Thickness: for example 2.0 mm
  • Lengths and quantities
  • Finish: HR, GI or colour coated white
  • Holes: a drawing or sketch with the hole positions
  • Site: where in Greater Noida the material is going

Not sure of the weight? Use the purlin weight calculator.

Areas served

Purlin supply in Greater Noida and nearby

Fabricators, contractors, PEB builders and shed owners in and around Greater Noida order C and Z purlins from us against their drawings. We deliver to:

  • Ecotech
  • Surajpur
  • Kasna
  • Udyog Kendra
  • Site IV
  • Site V
  • Dadri
  • Yamuna Expressway
  • Knowledge Park
By road to your siteBundled, loaded and sent by truck to the site or the fabricator’s yard in Greater Noida.
Cut to the lengths you needEach purlin is cut on the line, so there is little cutting and no wastage at site.
Punched and ready to boltCleat-bolt and sag-rod holes are punched to your drawing before the purlin is formed.

Not on the list? We supply purlins across India. Send your site location and we will confirm the delivery.

FAQ

Purlins in Greater Noida: questions, answered

Still have a question? Ask us on WhatsApp and our team will answer.

Do you supply C and Z purlins in Greater Noida?

Yes. Mahawar Prefab Solutions rolls C and Z purlins on its own line and delivers them by road to Greater Noida and nearby, including Ecotech, Surajpur, Kasna, Udyog Kendra, Site IV, Site V. Send your section, thickness, lengths and quantities on WhatsApp and we will confirm the supply to your site.

What is the price of C and Z purlins in Greater Noida?

Purlins are sold by weight, so the price in Greater Noida is the total weight of your order multiplied by the day's rate per kg, plus transport to your site. The rate moves with the price of steel coil and differs for HR, GI and colour coated purlins. Send your list and we will reply with today's price.

Which purlin finish suits Greater Noida: HR, GI or colour coated?

Open land means strong winds and dust, with summer heat and a humid monsoon. GI purlins are standard; laps and spacing must follow the design. HR purlins cost the least but need primer and paint.

What is the weight of a Z purlin per metre?

It depends on the size and thickness. A Z purlin 200 × 60 × 20 mm weighs about 5.42 kg per metre in 2.0 mm steel and about 6.70 kg in 2.5 mm; a C purlin of the same size weighs the same. The weight chart on this page lists the common sizes.

Is a purlin lighter than an MS channel or an MS tube?

Yes. For about the same stiffness a Z purlin 200 × 60 × 20 × 2.0 mm weighs about 5.42 kg per metre, an ISMC 125 channel about 12.7 kg and a 145 × 82 × 4.0 mm tube about 13.4 kg, so the channel and the tube need roughly two to two and a half times the steel.

What sizes of purlins do you make?

C and Z purlins from 125 mm to 250 mm deep, in thicknesses from 1.2 mm to 3.0 mm, cut to the length you ask for and punched to your drawing. Tell us the flange and lip sizes in your drawing and we will confirm them.

What should the purlin spacing be?

Spacing depends on the roofing sheet, the roof slope and the wind and snow loads at the site. On most sheds with 0.45 to 0.50 mm colour coated sheets, purlins sit about 1.0 to 1.5 m apart; heavier loads need closer purlins. Always follow the spacing in your structural drawing.

Which steel brands are available for purlins in Greater Noida?

Purlins are available in steel from Tata, AM/NS India, Madhav, APL Apollo and JSW. Tell us the make you prefer when you send your list.

Get a price

Get today’s purlin price in Greater Noida

Send your section, thickness, lengths and quantities. We will reply with the weight, the day’s rate and the delivery cost to your site.

Share and Enjoy !

Shares
Shares