Parwanoo · Himachal Pradesh · India
C & Z Purlin Manufacturer in Parwanoo
Mahawar Prefab Solutions (MPS) rolls C purlins and Z purlins in HR, galvanised (GI) and colour coated steel and supplies them in Parwanoo, Himachal Pradesh. Sections 125 to 250 mm deep in 1.2 to 3.0 mm steel, cut to your length and punched to your drawing, delivered to your site.
Purlins in Parwanoo
C & Z purlins for Parwanoo’s hill-side units
Parwanoo is Himachal’s oldest industrial town, built in sectors on the slopes above Kalka on the Shimla highway. Light engineering, plastics, fruit processing and consumer-goods units work here on small, stepped plots.
On a hill plot there is no room to cut and weld long steel. Purlins rolled to the exact length, punched and bundled make the roof a matter of lifting and bolting.
Roof purlinWall purlin (girt)
Inside a PEB warehouse
White roof purlinWhite purlins on the rafters
Wall purlin (girt)Wall purlins behind the wall sheetsWhat we supply in Parwanoo
C purlins and Z purlins, rolled to your drawing
Both sections come off the same line in the same sizes. The shape decides where each one works best. Compare C and Z in detail.
C purlinALSO CALLED CEE PURLIN OR C SECTION
Both flanges turn the same way, so one face is flat. It is simple to fix and easy to frame around doors and windows. C purlins meet end to end on a cleat; they are not overlapped.
- Wall girts
- Shorter roof spans
- Door and window framing
- Eave struts
- Mezzanine joists
Z purlinALSO CALLED ZED PURLIN OR Z SECTION
The flanges turn opposite ways, so two Z purlins nest into each other and can be overlapped (lapped) over a rafter. The lap makes the purlin continuous over its supports, so it carries more load for the same weight of steel.
- Roofs of PEB buildings
- Larger bays
- Continuous spans
- Walls of tall sheds
Three finishes
HR, GI or colour coated: which purlin for Parwanoo?
The section and the sizes are the same. What changes is the steel it is rolled from, and how well that steel stands up to rust.
HR purlinHOT ROLLED (MS), BLACK
Rolled from hot-rolled steel strip as it comes from the mill: a dark grey-black surface with no coating.
- The lowest price of the three
- Needs primer and paint to keep rust away
- For dry, covered buildings and for steel that will be painted anyway
GI purlinGALVANISED
Rolled from galvanised steel: a zinc coating of 80 to 275 GSM on both faces of the strip.
- No painting needed at site
- The zinc goes on protecting the steel at small scratches and cut ends
- For PEB buildings, factory sheds, warehouses and solar structures
Colour coated purlinWHITE
Rolled from galvanised steel with a factory-baked paint coat over the zinc. The colour is white.
- Two layers of protection: zinc, then paint
- A clean white finish that brightens the inside of the building
- For buildings where the roof steel stays on view, and for humid or corrosive sites
In Parwanoo: Hill rain, mist and cool, damp winters keep steel wet. GI purlins are the standard here; follow the design for wind on exposed slopes.
Steel brands available with us
Tell us the make you prefer when you send your list.
Sizes and weight
C & Z purlin weight chart
Weight in kg per running metre for the common sizes. A C purlin and a Z purlin of the same size weigh the same. For any other size, use the purlin weight calculator.
Purlin weight per metre (kg/m)
Size is depth × flange × lip in mm
| C or Z purlin size | 1.2 mm | 1.5 mm | 1.8 mm | 2.0 mm | 2.5 mm | 3.0 mm |
|---|---|---|---|---|---|---|
| 125 × 50 × 15strip about 240 mm | 2.32 | 2.87 | 3.41 | 3.77 | 4.64 | 5.48 |
| 150 × 50 × 15strip about 265 mm | 2.55 | 3.17 | 3.77 | 4.16 | 5.13 | 6.07 |
| 175 × 60 × 20strip about 320 mm | 3.07 | 3.81 | 4.54 | 5.03 | 6.21 | 7.36 |
| 200 × 60 × 20strip about 345 mm | 3.31 | 4.11 | 4.90 | 5.42 | 6.70 | 7.95 |
| 225 × 75 × 20strip about 400 mm | 3.83 | 4.76 | 5.67 | 6.28 | 7.78 | 9.25 |
| 250 × 75 × 20strip about 425 mm | 4.06 | 5.05 | 6.03 | 6.67 | 8.27 | 9.84 |
Calculated weight = strip width × thickness × 7.85 (the density of steel), taking the inside bend radius as 1.5 times the thickness. Actual weight varies a little with the coil’s thickness tolerance and zinc coating. The flange and lip sizes shown are the common ones; we roll to the sizes in your drawing. To get the weight of one purlin, multiply by its length in metres.
Why sheds moved to purlins
Purlin vs MS channel vs MS tube: half the weight
Many sheds in Parwanoo still carry their sheets on MS channels or MS tubes. A roll-formed C or Z purlin of about the same stiffness needs less than half the steel, so you buy fewer kilos and the building carries a lighter roof.
C or Z purlin
Z 200 × 60 × 20 × 2.0 mm
5.42 kg per metre
Thin strip, deep section
The steel sits where it works: a deep web, two flanges and a stiffening lip on each.
MS channel
ISMC 125 × 65 mm
12.7 kg per metre
2.3 times the weight of the purlin
Hot-rolled, with a thick web and thick flanges. Strong, but a roof purlin does not need most of that steel.
MS tube
Rectangular tube 145 × 82 × 4.0 mm
13.4 kg per metre
2.5 times the weight of the purlin
A closed box with four walls, so there is steel on every side, needed or not.
All three are drawn to the same scale and have about the same stiffness (Ixx 404, 416 and 476 cm⁴).
Want the full comparison? Three size steps, what 1,000 metres of purlin weighs in each, and how the sizes were matched: purlin vs MS channel vs MS tube.
Applications
Where C and Z purlins are used in Parwanoo
Wherever a sheet has to be fixed to a steel frame, there is a purlin or a wall purlin (girt) behind it.
Sheets for the same roof: roofing sheets in Parwanoo. The complete building: pre-engineered buildings in Parwanoo.
Price and ordering
Purlin price in Parwanoo: what decides it
Purlins are sold by weight. The rate per kg moves with the price of steel coil, so we quote the day’s rate against your list, with transport to Parwanoo.
What to send for a quick quote
- Section: C or Z
- Size: depth × flange × lip, for example 200 × 60 × 20 mm
- Thickness: for example 2.0 mm
- Lengths and quantities
- Finish: HR, GI or colour coated white
- Holes: a drawing or sketch with the hole positions
- Site: where in Parwanoo the material is going
Not sure of the weight? Use the purlin weight calculator.
Areas served
Purlin supply in Parwanoo and nearby
Fabricators, contractors, PEB builders and shed owners in and around Parwanoo order C and Z purlins from us against their drawings. We deliver to:
- Sector 1
- Sector 2
- Sector 3
- Sector 4
- Sector 5
- Taksal
- Kalka
- Pinjore
- Dharampur
- Jabli
Not on the list? We supply purlins across India. Send your site location and we will confirm the delivery.
FAQ
Purlins in Parwanoo: questions, answered
Still have a question? Ask us on WhatsApp and our team will answer.
Do you supply C and Z purlins in Parwanoo?
Yes. Mahawar Prefab Solutions rolls C and Z purlins on its own line and delivers them by road to Parwanoo and nearby, including Sector 1, Sector 2, Sector 3, Sector 4, Sector 5, Taksal. Send your section, thickness, lengths and quantities on WhatsApp and we will confirm the supply to your site.
What is the price of C and Z purlins in Parwanoo?
Purlins are sold by weight, so the price in Parwanoo is the total weight of your order multiplied by the day's rate per kg, plus transport to your site. The rate moves with the price of steel coil and differs for HR, GI and colour coated purlins. Send your list and we will reply with today's price.
Which purlin finish suits Parwanoo: HR, GI or colour coated?
Hill rain, mist and cool, damp winters keep steel wet. GI purlins are the standard here; follow the design for wind on exposed slopes. HR purlins cost the least but need primer and paint.
What is the weight of a Z purlin per metre?
It depends on the size and thickness. A Z purlin 200 × 60 × 20 mm weighs about 5.42 kg per metre in 2.0 mm steel and about 6.70 kg in 2.5 mm; a C purlin of the same size weighs the same. The weight chart on this page lists the common sizes.
Is a purlin lighter than an MS channel or an MS tube?
Yes. For about the same stiffness a Z purlin 200 × 60 × 20 × 2.0 mm weighs about 5.42 kg per metre, an ISMC 125 channel about 12.7 kg and a 145 × 82 × 4.0 mm tube about 13.4 kg, so the channel and the tube need roughly two to two and a half times the steel.
What sizes of purlins do you make?
C and Z purlins from 125 mm to 250 mm deep, in thicknesses from 1.2 mm to 3.0 mm, cut to the length you ask for and punched to your drawing. Tell us the flange and lip sizes in your drawing and we will confirm them.
What should the purlin spacing be?
Spacing depends on the roofing sheet, the roof slope and the wind and snow loads at the site. On most sheds with 0.45 to 0.50 mm colour coated sheets, purlins sit about 1.0 to 1.5 m apart; heavier loads need closer purlins. Always follow the spacing in your structural drawing.
Which steel brands are available for purlins in Parwanoo?
Purlins are available in steel from Tata, AM/NS India, Madhav, APL Apollo and JSW. Tell us the make you prefer when you send your list.
Related pages
- C & Z purlins: the full guideSizes, the weight calculator, the 3D purlin line and fixing tips.
- Roofing sheets in ParwanooColour coated sheets that go on top of your purlins.
- Pre-engineered buildings in ParwanooComplete steel buildings: design, fabrication and erection.
- MS structural steelAngles, channels, beams and pipes for trusses and frames.
Get a price
Get today’s purlin price in Parwanoo
Send your section, thickness, lengths and quantities. We will reply with the weight, the day’s rate and the delivery cost to your site.






