Roofing Sheet
Manufacturer in
Sangrur
DATASHYNE colour coated sheets in PPGI and PPGL for Sangrur's rice shellers, mandi godowns, agro units and farm buildings — planned and delivered to fit the gap between one season and the next.
Metal Roofing Sheets for Sangrur's Grain Economy
Few districts in Punjab live as completely by the crop calendar as Sangrur. Rice shellers run flat out through the paddy season and stand quiet after it, the mandis at Sunam, Dhuri, Lehragaga, Bhawanigarh and Khanauri fill and empty on a schedule everyone knows by heart, and the agro units and cattle sheds between them work to the same rhythm. Dhuri adds its sugar and rail trade, Longowal its institutional building.
Which means roofing here is as much a question of timing as of specification. A shed that must be watertight before procurement starts, or a sheller roof that can only be touched in the quiet months, leaves no room for material arriving late or a job being rushed at the end. DATASHYNE sheets are rolled at our Mandi Gobindgarh plant in PPGI (pre-painted galvanised iron) and PPGL (pre-painted galvalume) — close enough for planning to be realistic — with Jindal, JSW, AM/NS India and Indradhanush stocked beside them.
Pre-engineered building fabrication is the firm's other trade, so spans, purlin spacing and the sequence of putting a shed up are practical knowledge rather than theory. Whether it is a new sheller bay, a godown before the next arrival season, or re-sheeting a roof in the weeks when the floor is empty, tell us the deadline as well as the dimensions.
Roofing Sheets We Manufacture & Supply
Five families of sheet from one manufacturer — specified for the building and, just as importantly, for when you need it standing.
Colour Coated Sheets — DATASHYNE
Our own production: metal-coated steel finished in factory paint and roll-formed into a rib that stiffens the sheet and moves water off quickly.
- Colour that lasts many seasons
- Protective coat beneath it
- Goes up fast when time is short
PPGI Roofing Sheets
Zinc-coated steel with a painted face — the economical choice, and enough for dry stores, workshops and general cover.
- Easy on a season's budget
- Sound in ordinary conditions
- Shades across the range
PPGL Roofing Sheets
Aluminium-zinc coated steel — it holds up far better above humid stored grain and lasts longer on a roof you cannot easily take out of service.
- Longer life over stored grain
- Cooler through a Malwa summer
- Fewer interruptions to the season
Industrial Roofing Sheets
The uprated specification — heavier gauge, better coating, deeper rib — for sheller floors, wide godown spans and buildings that cannot fail mid-season.
- Specified for the season it faces
- Rolled on our own line
- Shellers, agro units, large godowns
Metal & Profile Sheets
The everyday family — ribbed and trapezoidal sheet for cattle byres, implement stores, loading canopies, side cladding and small workshops.
- Roof or wall, one material
- Simple for a local crew
- Ribs and shades to choose
Brands We Deal In
DATASHYNE from our own line and four stocked brands — Jindal, JSW, AM/NS India, Indradhanush — quoted together against one requirement.
Datashyne
Our Own Brand
Jindal
We Deal In
JSW
We Deal In
AM/NS India
We Deal In
Brand availability varies by specification and current stock — tell us your requirement and we'll confirm options across brands with current pricing.
What We Roof Across Sangrur District
Paddy, the mandi and the cattle shed account for most of it — and each has a season when work simply cannot happen.
Processing floors sheeted before the season they were built for.
Godowns made watertight ahead of the first arrivals.
Town and roadside buildings clad in colour coated sheet.
Frame and sheeting from one firm, erected to one programme.
Cattle sheds and farm stores built between one harvest and the next.
Milling and drying floors that run without pause in season and can only be re-roofed out of it.
Purchase-centre storage at Sunam, Dhuri, Lehragaga, Bhawanigarh and Khanauri.
Trader and farmer godowns holding stock between arrival and dispatch.
Food and agri-based plants working to the same seasonal clock as everyone else.
Byres and calf cover across villages where dairying steadies the year.
Repair yards, fabrication units and the farm structures that serve them.
Structure and sheeting from one workshop, handed over on a single programme.
Old sheet stripped and replaced in the weeks when the floor below is finally empty.
Why Buy From Mahawar Prefab Solutions
A roof needed before procurement is a different conversation from one with months in hand. Say when it must be standing and we will be straight about what is realistic.
Mandi Gobindgarh is a short run from this district, which makes planning around a narrow working window practical rather than hopeful.
We roll the sheet ourselves, so questions about coating, gauge and dispatch reach the people who actually decide them.
Our name goes on every bundle, which keeps consistency across a season's orders our own responsibility.
PPGI and PPGL are equally ours to make, so the advice follows your building rather than our stock position.
Years of trading steel alongside manufacturing it keeps the grade and market advice grounded in practice.
PEB fabrication means spans, purlins and erection sequence are daily work — which matters when the calendar is tight.
DATASHYNE with Jindal, JSW, AM/NS India and Indradhanush — specified and priced together instead of chased one by one.
How to Choose the Right Roofing Sheet
Decide the roof when the floor is quiet, not when the trucks are due. Working backwards from the date it must be watertight leaves room for the specification to be got right instead of settled in a hurry.
Almost every early failure we are called to see traces back to haste — short laps, missed edge sealing, fasteners driven anyhow. The sheet rarely fails first; the fixing does.
A sheller or godown roof is best replaced when the building is empty. Measure the existing profile and purlin spacing well ahead so the material is waiting when the window opens.
Metallic coating measured in grams per square metre is what buys years. Over humid stored grain and inside a sheller, buy above the minimum — you cannot easily take that roof out of service later.
Purlin spacing sets the thickness; open Malwa sites and maintenance traffic push it up. State the spacing and the gauge stops being guesswork.
Deep enough ribs and honest slope clear monsoon rain fast, and laps sealed properly keep the water that lingers from doing harm to stock below.
Roof area against the 1000 mm each sheet covers when laid, then overlaps, ridge, flashings and offcuts on top. Send dimensions and the count comes back checked.
Where every enquiry ends. The table sets both out against what this district's buildings actually endure.
| Factor | PPGI (Galvanised) | PPGL (Galvalume) |
|---|---|---|
| Base coating | Zinc | Aluminium-zinc alloy |
| Corrosion resistance | Good for standard environments | Superior, longer life |
| Heat reflectivity | Moderate | Better — cooler interiors |
| Cost | More economical | Higher, justified by lifespan |
| Best for | Implement sheds, workshops, dry cover | Shellers, grain godowns, cattle sheds |
Roofing Sheet Price in Sangrur — What Makes the Rate
Sheet is sold by weight or covered area over a coil market that moves every week. Six inputs decide your figure — and ordering early rarely costs more than ordering late.
Thicker sheet means more steel and a higher rate for the area covered.
Choosing a high-tensile substrate lifts the rate above ordinary grade.
Galvalume above galvanised, and heavier coating above the minimum within each.
Deeper ribs take more steel to cover the same roof.
Bigger orders bring the per-sheet figure down.
Delivery adds landed cost, over a base the coil market keeps resetting.
Supplying Sangrur, Sunam, Dhuri & the Mandi Towns
Sangrur is a short run from our Mandi Gobindgarh works, which makes both a full sheller roof and a modest godown order straightforward to plan. Sheller owners, mandi traders, agro units, dairy and crop farmers, fabricators and contractors here order DATASHYNE, PPGI and PPGL against written specifications and agreed timelines.
Give us the town or village, the building, and the date it needs to be standing — we will confirm the specification and a realistic supply plan before anything is committed.
Frequently Asked Questions
Who manufactures roofing sheets supplied in Sangrur?
Mahawar Prefab Solutions — DATASHYNE colour coated sheet is rolled at our Mandi Gobindgarh plant, a short run from this district, and supplied across Sangrur, Sunam, Dhuri and the mandi towns. PPGI and PPGL are both our own production, four mill brands are stocked with them, and pre-engineered building fabrication is the firm's other trade.
What can I order for a sheller or godown?
Ribbed colour coated sheet for roofing and side cladding, over a zinc base (PPGI) or an aluminium-zinc base (PPGL), in the working range of gauges, profiles and shades, cut to the lengths the building needs. For grain buildings the coating decision usually matters most, so tell us what is stored and how long it sits.
Which brands do you stock besides DATASHYNE?
We keep Jindal, JSW, AM/NS India and Indradhanush colour coated material alongside our own rolling. One enquiry brings back specification and current rate for all five against the same brief, which is the only way the comparison tells you anything. Stock depends on specification and season and is confirmed against your requirement.
What does PPGI mean in plain terms?
Steel coated with zinc so it resists rust, painted at the factory, then rolled into ribs. It is the ordinary economical sheet across Punjab and serves well over implement sheds, workshops and dry cover in this district. Where humid grain or a sheller floor is involved, the heavier coating below is the more sensible purchase.
Why recommend PPGL for shellers and grain storage?
Because those roofs are hard to take out of service and the air beneath them is damp for months at a time. Aluminium-zinc coating stands up to that considerably longer than plain zinc, and it reflects more summer heat over stored stock. When replacing a roof means interrupting a season, buying the longer-lived one is usually the cheaper decision.
What do roofing sheets cost in Sangrur?
No fixed rate can honestly be published, because colour coated pricing follows the steel coil market week to week. What you pay is built up from the gauge, the coating and its class, the rib profile, the shade, how much you take and how far it travels. Send those details by WhatsApp or phone and a current, itemised quotation comes back that you can weigh against any other.
When should I order if the shed must be ready before the season?
Sooner than most people do. Work backwards from the date the building must be watertight and allow time for the specification to be settled, the material to be rolled and delivered, and the roof to be fixed without anyone hurrying. Tell us the deadline at the first call and we will say plainly whether it is achievable rather than discovering it late.
Can a sheller roof be replaced without stopping work?
Partly, and it is far better planned for the off-season. Some buildings can be done bay by bay with only a section open at a time; many cannot, in which case the quiet months between crops are the window. Measure the old profile and purlin spacing well in advance so the material is ready when that window arrives rather than being ordered once it opens.
Why do new roofs sometimes leak within a season or two?
Usually because they were finished in a rush. Short lap lengths, cut edges left unsealed, and fasteners driven at whatever spacing was quick will let water in regardless of how good the sheet is. Those are all fixing decisions, not material ones, and the way to avoid them is to allow the work enough days rather than squeezing it before an arrival date.
How is thickness decided for a godown or shed?
Purlin spacing gives the baseline, exposure raises it, and roofs walked on for maintenance want a little more again. Describe the frame, the span and the site and two or three suitable gauges come back with the cost difference between them set out plainly enough to decide on quickly.
How do I judge the best roofing sheet suppliers in Sangrur?
Four questions do most of the sorting: does the supplier manufacture or only resell, are both coating families genuinely available, is the coating class written on the quotation, and is the rate current with the coil market? In a district that runs on deadlines, add a fifth — will they commit to a delivery date honestly. Ask us all five.
Sheets only, or the whole building?
Either. Fabricators and mistris take sheets for frames they are putting up; owners who prefer one accountable party take the complete pre-engineered building — structure, roofing and cladding in a single scope. When a season deadline is involved, the single-scope route usually keeps the programme tighter, because nobody is waiting on anybody else.
Roofing a Sheller, Godown or Farm Shed Before the Season?
Send the shed size, lengths and quantity, your coating preference, the town or village — and the date it has to be finished. The reply covers specification, timing and today's rate.