Roofing Sheet
Manufacturer in
Tarn Taran
DATASHYNE colour coated sheets in PPGI and PPGL for Tarn Taran's shellers, dairy sheds, godowns and workshops — specified against the purlins you already have, not against a catalogue.
Metal Roofing Sheets for Tarn Taran's Farms & Sheds
Tarn Taran is Majha farming country. Paddy and wheat move through the mandis at Patti, Bhikhiwind and the district town, rice shellers work the season, dairy is a steady second income across the villages, and the industrial pocket at Goindwal Sahib adds workshops and processing units. Out towards Khemkaran and Khalra the farms run right up to the border, and towards Harike the rivers meet.
Most roofing enquiries from this district are not for new buildings at all — they are for sheds that already stand, whose old chadar has finally given up. That makes the frame the starting point: the spacing of the purlins already up there decides what thickness of sheet can safely go on them, and no amount of good material rescues a roof laid over a frame that cannot carry it. DATASHYNE sheets are rolled at our Mandi Gobindgarh plant in PPGI (pre-painted galvanised iron) and PPGL (pre-painted galvalume), with Jindal, JSW, AM/NS India and Indradhanush stocked beside them.
Because we fabricate pre-engineered buildings as well, questions about frames are ours to answer rather than pass along. Send the purlin spacing along with the roof dimensions and you will get a straight reply about what gauge suits it, whether an intermediate purlin is worth adding, and what that changes in the cost.
Roofing Sheets We Manufacture & Supply
Five families of sheet from one manufacturer — narrowed down by what your frame can carry and what the building holds.
Colour Coated Sheets — DATASHYNE
Our own production: metal-coated steel finished in factory paint and roll-formed into a rib that spans between purlins and sheds rain.
- Colour that holds its own
- Coated steel beneath the paint
- Light enough for an old frame
PPGI Roofing Sheets
Zinc-coated steel with a painted face — the economical standard, and the right answer over dry stores and general-purpose sheds.
- Keeps a re-roofing job affordable
- Sound in everyday exposure
- Colours to suit the building
PPGL Roofing Sheets
Aluminium-zinc coated steel — worth its price wherever damp lingers under the roof, which in this district means most cattle and grain buildings.
- Longer life over damp air
- Cooler for stock beneath
- Right for byres and shellers
Industrial Roofing Sheets
The uprated specification — heavier gauge, better coating, deeper rib — for wider purlin spacings and buildings that work all season.
- Sized to the span it must cross
- Rolled on our own line
- Shellers, processing units, godowns
Metal & Profile Sheets
The everyday family — ribbed and trapezoidal sheet for cattle byres, tractor cover, tubewell rooms, canopies and side cladding.
- Roof or wall, same material
- Any village crew can fix it
- Ribs and shades to pick
Brands We Deal In
DATASHYNE rolled by us and four brands on the shelf — Jindal, JSW, AM/NS India, Indradhanush — all quoted against one set of measurements.
Datashyne
Our Own Brand
Jindal
We Deal In
JSW
We Deal In
AM/NS India
We Deal In
Brand availability varies by specification and current stock — tell us your requirement and we'll confirm options across brands with current pricing.
What We Roof Across Tarn Taran District
Mostly farm and grain buildings — and mostly frames that have already stood a good many years.
Working sheds re-sheeted to suit the frame beneath them.
Grain storage sealed against a Majha monsoon.
Roadside shops and small showrooms in the district towns.
New frames designed around the roof they will carry.
Byres, fodder stores and farm sheds across the Majha villages.
Milling and drying floors working the paddy season through, humid from end to end.
Purchase-centre storage at Patti, Bhikhiwind and the district town.
Byres and calf cover across villages where dairy steadies the household income.
Farm godowns and fodder cover holding a season's stock out of the weather.
Workshops and processing sheds in the district's industrial pocket.
The small structures every farm needs, often roofed once and left for twenty years.
New engineered sheds where the frame is designed for the roof from the outset.
Worn chadar and cement sheet stripped off frames that still have years left in them.
Why Buy From Mahawar Prefab Solutions
Purlin spacing decides what gauge is safe to lay. Send that with your measurements and the quotation is built on fact rather than on whatever thickness is usual.
If the frame needs an extra purlin or a repair before new sheet goes on, we will say so — even though it delays the order. Sheet laid over a tired frame disappoints everyone.
We roll the sheet ourselves, so coating, gauge, length and dispatch are settled by those who decide them.
Our brand goes out on every bundle, which makes the material's consistency our own concern.
Mandi Gobindgarh keeps coil at the door, and material runs up into the Majha districts as regular business.
PPGI and PPGL are both ours to roll, so the recommendation follows your building and not our stock.
PEB fabrication means spans, purlins and connections are daily work here — which is exactly what a re-roofing job turns on.
Our DATASHYNE alongside Jindal, JSW, AM/NS India and Indradhanush, quoted together so nothing has to be chased separately.
How to Choose the Right Roofing Sheet
Before anything else, measure the gap between the purlins on the shed you are re-roofing. That single number decides what gauge can safely be laid, and it is the first thing we will ask for.
Look along the frame for rusted or rotted members and sagging lines. Spending on good sheet while leaving a failing frame beneath is money half wasted — better to know before ordering than after fixing.
Where the spacing is wide, adding an intermediate purlin can let you use a lighter, less costly sheet — sometimes saving more than the purlin costs. Worth pricing both ways before deciding.
Extending rather than replacing? The rib profile of the existing sheet has to match, or the join will trouble you every monsoon. Measure it, or photograph it against a tape.
Metallic coating in grams per square metre is the roof's working life. Over cattle, stored grain or a sheller floor, this district's damp argues for buying above the minimum.
Correct screws, sound washers, generous laps and sealed cut edges. On a re-roofing job the fixings are new even when the frame is old, so there is no excuse for getting them wrong.
Take the roof area against the 1000 mm each sheet covers when laid, then add for overlaps, ridge, flashings and offcuts. Send the measurements and we return a checked count.
Where every enquiry ends up. The table sets the two out on what buildings here actually face.
| Factor | PPGI (Galvanised) | PPGL (Galvalume) |
|---|---|---|
| Base coating | Zinc | Aluminium-zinc alloy |
| Corrosion resistance | Good for standard environments | Superior, longer life |
| Heat reflectivity | Moderate | Better — cooler interiors |
| Cost | More economical | Higher, justified by lifespan |
| Best for | Tractor cover, dry stores, light sheds | Byres, shellers, grain godowns, long service |
Roofing Sheet Price in Tarn Taran — What Sets the Rate
Sheet is priced by weight or covered area on a coil market that moves every week. Six inputs decide your figure — and the frame quietly influences the first of them.
Wide purlin spacing forces a thicker sheet, and thicker sheet costs more per foot.
A high-tensile substrate carries a premium over ordinary grade.
Galvalume above galvanised, and a heavier coating above the minimum in either.
Deeper ribs use more steel to cover the same roof.
More sheets on the order means a better rate for each of them.
Delivery to the village adds landed cost, over a base the market keeps resetting.
Supplying Tarn Taran, Patti, Bhikhiwind & Goindwal Sahib
Material runs from our Mandi Gobindgarh plant up into the Majha districts on established routes, Tarn Taran among them. Sheller owners, mandi traders, dairy and crop farmers, workshop operators, fabricators and contractors order DATASHYNE, PPGI and PPGL here — a whole shed's worth or enough to re-roof one bay.
Send the village or town along with the roof measurements and the purlin spacing, and we will confirm the specification and the supply arrangement before anything is rolled.
Frequently Asked Questions
Who manufactures roofing sheets supplied in Tarn Taran?
Mahawar Prefab Solutions — DATASHYNE colour coated sheet is rolled at our Mandi Gobindgarh plant and carried up into the Majha districts, reaching Tarn Taran town, Patti, Bhikhiwind and the villages around them. We roll PPGI and PPGL ourselves, keep four mill brands in stock, and fabricate pre-engineered buildings as the firm's second trade.
What can I buy for a shed or godown here?
Ribbed colour coated sheet for roofing and side cladding, on a zinc base (PPGI) or an aluminium-zinc base (PPGL), across the usual gauges, profiles and shades, cut to your lengths. Which gauge suits you depends on the purlin spacing of the frame it goes on — so that measurement matters as much as the roof's overall size.
Besides your own brand, what else do you keep?
Jindal, JSW, AM/NS India and Indradhanush colour coated material sits in stock beside our own rolling. Send the requirement once and back come specification and current rate for all five against the same measurements. What is on hand shifts with specification and season, so we confirm availability against your actual need.
I am re-roofing an old shed — what should I measure first?
The purlin spacing, before anything else. The distance between purlins decides what thickness of sheet can safely span them, and getting that wrong is the most common mistake in re-roofing work. Measure it, note the overall roof dimensions, and photograph the existing sheet profile against a tape — with those three things a proper specification can be written.
What if my frame is too widely spaced for the sheet I want?
You have two honest options: go to a heavier gauge, or add an intermediate purlin. Adding the purlin often works out cheaper, because it lets you use a lighter sheet across the whole roof and the saving can exceed the cost of the steel. We will price it both ways so the choice is yours rather than ours.
Should the old frame be checked before ordering sheet?
Always, and it takes only a walk along the shed. Look for rusted or rotted members, sagging purlins and any line that has dropped. New sheet over a failing frame is money half spent, and the time to find out is before ordering rather than when the crew is standing on the roof. If we can see photographs, we will give you an honest view.
What is PPGI, and when is it enough?
Pre-painted galvanised iron means a zinc coat over the steel, a baked paint finish on top, and the whole thing pressed into ribs. Over tractor cover, dry stores and light sheds around this district it does an honest job at the lowest reasonable cost. Where cattle, stored grain or a sheller floor put damp air under the roof, the coating below is worth the difference.
Why choose PPGL for a byre or sheller?
Because the air beneath those roofs is damp for months on end, and moisture is what retires zinc coatings early. Aluminium-zinc coating handles that far better and reflects more summer heat over animals and stock. On a roof you would rather not disturb again for a decade or more, it usually works out the cheaper of the two.
What do roofing sheets cost in Tarn Taran?
The rate is put together from gauge, coating family and class, profile, shade, quantity and delivery to your village, over a coil market that resets weekly. A published figure would mislead more than it helped. Send the details on WhatsApp or by phone and a current, itemised quotation comes back you can compare on equal terms.
Can I extend an existing roof rather than replace it?
Yes, provided the new sheet matches the profile already up there — otherwise the junction between old and new will leak every monsoon. Measure the existing rib, or send a photograph with a tape held across it, and we will confirm what matches. The purlin spacing on the extension should follow the same logic as the original.
How do I judge the best roofing sheet suppliers in Tarn Taran?
Four questions cover most of it: does the supplier manufacture or only resell, are both coating families genuinely offered, is coating class written on the quotation, and is the rate current with the coil market? For re-roofing work, add one more — did they ask about your purlins before quoting a thickness? Put all five to us too.
Do you handle the shed itself, or only supply the roofing?
Either suits us. Mistris and fabricators buy sheets for frames they are working on; owners who want one party answerable take the complete pre-engineered building — frame, roofing and cladding together. On a new shed the single-scope route means the frame is designed for the roof from the start, which avoids the compromises re-roofing forces.
Re-Roofing a Shed or Building a New One in Tarn Taran?
Send the roof dimensions, the purlin spacing if you can measure it, your coating preference and the village or town. Back comes a specification that suits the frame, with today's rate against it.