High-strength steel structures designed for factories, warehouses, and commercial buildings.
PEB Sheds & Steel Buildings in Rohtak
Rohtak sits on the Delhi-Rohtak highway (NH-10), close enough to the capital to serve NCR markets but with land that is easier to find. The city has long been known for its nut-and-bolt trade, and HSIIDC’s Industrial Model Township (IMT) Rohtak has since added large planned industrial plots.
Mahawar Prefab Solutions (MPS) designs, fabricates and erects steel pre-engineered buildings (PEB) for factory owners and warehouse investors here. Everything is made at our own plant in Mandi Gobindgarh, Punjab. We are an MSME ourselves, certified ISO 9001:2015, ISO 45001:2018 and ZED Bronze, so we price and plan the way a small or mid-sized business needs.
PEB Buildings We Supply in Rohtak
In Rohtak and IMT Rohtak a pre-engineered building is usually a fastener or machine shop, an auto-component vendor plant, a footwear unit, a warehouse for paint, FMCG and e-commerce stock, or an agro and food unit.

Machine Shops & Auto Plants
Long clear-span sheds for heading machines and component lines

Warehouses & Godowns
For paint, FMCG and e-commerce stock moving through Rohtak

Footwear & Food Units
Wide, well-lit halls with ridge ventilation
Why Choose Mahawar Prefab Solutions for PEB in Rohtak
✔ Own plant in Mandi Gobindgarh, about 225 km by road (a day’s run for a loaded trailer)
✔ Designed for Rohtak’s wind, heat and earthquake loads
✔ ISO 9001:2015, ISO 45001:2018 and ZED Bronze certified MSME
✔ C/Z purlins and colour-coated roofing sheets rolled in-house (PPGI, PPGL, ZAM, DATASHYNE)
✔ Steel design to IS 800:2007, loads to IS 875 and IS 1893
✔ Complete design, fabrication, supply and erection
Rohtak's industrial base at a glance
- 1. IMT Rohtak (HSIIDC) – the main planned industrial township, on NH-10 towards Delhi. Phase III extends into Sampla tehsil, around villages such as Baliyana, Kheri Sadh and Nonand.
- 2. Footwear Park, IMT Rohtak Phase II & III – HSIIDC has auctioned plots here for footwear units, which links Rohtak with the established footwear cluster in nearby Bahadurgarh.
- 3. Large anchor units – Asian Paints has run a paint plant at IMT Rohtak since 2010, and Maruti Suzuki’s R&D centre with its test tracks is in Rohtak. Plants like these bring vendors, packaging suppliers and logistics firms with them.
- 4. Fasteners and turned parts – Rohtak is known for nuts, bolts, screws and machined components, mostly made by small and medium units in the city’s older industrial areas.
Put together, most enquiries we expect from Rohtak are for engineering sheds, vendor plants for the auto sector, footwear production halls and warehouses serving the Delhi market.
Our Quality Offerings
Prefabricated Structures
Modular buildings manufactured off-site and assembled on-site for uses like site offices, classrooms, and healthcare facilities.
Pre Engineered Buildings
Customized steel structures designed for fast installation and long-term durability, ideal for warehouses and factories.
Color Coated Roofing Sheets
High-quality color coated metal roofing sheets designed for durability, weather resistance, and long service life.
PUF Panel
Systems
Insulated PUF panel systems ideal for temperature-controlled buildings, cold storages, and industrial structures.
Structural Steel Fabrication
Precision-engineered structural steel components manufactured for industrial buildings and PEB structures.
Buildings we supply in Rohtak and why PEB fits
A pre-engineered building in Rohtak is usually one of these:
- Fastener and machine shops – long, clear-span sheds where heading machines, thread rollers and furnaces can be laid out in a straight line. We can add a crane runway if you handle coils or dies.
- Auto-component vendor plants – clean production halls with a mezzanine for offices, quality lab or stores.
- Footwear units – wide, well-lit halls with ridge ventilation or a ventilation monitor, because stitching and lasting lines need light and air more than height.
- Warehouses and godowns – for paint, FMCG and e-commerce stock moving towards Delhi along NH-10.
- Agro and food units – the district still has a strong farm economy, so grain stores and small processing units remain common.
A PEB in Rohtak suits these jobs because the frame is designed for your exact size and load, made in a factory and bolted together on site. There is no long wait for concrete to cure, the shed can be extended later by adding bays, and steel weight is kept to what the design needs. For budgets, see our warehouse PEB cost guide. To understand the building system itself, read our main page on pre-engineered buildings (PEB).
Dispatch, transport and erection for Rohtak sites
Rohtak is about 225 km from our plant by road, roughly a day’s run for a loaded trailer through Punjab and Haryana’s national highways. Columns, rafters, purlins and our own colour-coated sheets go out together, marked to match the erection drawings, so the crew can erect each piece in the right order without rework.
Our erection team works on your site with cranes and a site supervisor. You can follow progress through our digital tracking: dispatch logs, photo updates and a progress dashboard.
Typical timelines in the PEB industry for a mid-sized shed are a few weeks for design and approval drawings, then some weeks of fabrication, then erection that is often finished in a matter of weeks rather than months. Your actual schedule depends on size, crane work, mezzanines and when foundations are ready, and we will give it to you in writing with the quotation.
Local design conditions and the codes we follow
Rohtak’s flat, hot and often damp land shapes the design of a pre-engineered building in Rohtak in a few ways:
- Soil and water – much of the Rohtak-Jhajjar belt has waterlogging and saline groundwater. Your civil engineer should get a soil test done. We size the column base reactions and anchor bolts to suit the foundation design, and we recommend good plinth height and proper drainage around the building.
- Corrosion – where salts and dampness are present near the ground, base plates and lower column portions need careful painting. We can suggest a heavier paint system, and roofing in PPGL AZ150 or ZAM coating for longer life.
- Heat and dust – summers are very hot. Pre-insulated Coolshyne roofing sheets, ridge ventilators and polycarbonate skylights help keep working halls usable.
- Wind and dust storms – the frame, purlins and sheet fixing are designed for the basic wind speed IS 875 (Part 3) specifies for the site.
- Earthquakes – the wider Delhi region carries real earthquake risk. We design to the seismic zone that applies to your site under the current IS 1893.
Our design codes are IS 800:2007 for steel, IS 875 Parts 1, 2 and 3 for dead, imposed and wind loads, and IS 1893 for earthquake loads. Our 25+ quality checkpoints run from design through fabrication to site work.
| Condition in Rohtak | What we do in the design |
|---|---|
| Waterlogging, saline soil | Foundation loads shared early; better base protection |
| Hot summers | Insulated roof, ventilators, skylights |
| Strong winds | Wind loads as per IS 875 (Part 3) |
| Earthquake risk | Seismic design as per IS 1893 |
Information to send with your enquiry
- Plot location (for example, IMT Rohtak plot number) and a site layout or plot plan
- Length, width and clear height you need
- Crane need: capacity in tonnes and hook height
- Mezzanine, office or lean-to requirements
- What the building is for (machines, storage, footwear lines, cold storage)
- Soil test report, if already done
- Roofing preference: plain colour-coated, pre-insulated or with skylights
Share your size and we can model your building in 3D before you decide.
FAQs for Rohtak buyers
Yes. We are a prefabricated structures manufacturer supplying Rohtak, IMT Rohtak and the surrounding district. We design, make, deliver and erect the full steel building from our Mandi Gobindgarh plant.
Our plant in Mandi Gobindgarh, Punjab, is about 225 km from Rohtak by road. A loaded trailer normally covers this distance in about a day.
Yes. We give your civil engineer the column loads early so foundations can suit the soil test, and we suggest better protection for base plates and lower steel where dampness and salts are present.
Yes. Fastener units usually need long clear-span sheds and sometimes a crane, while footwear units need wide halls with good light and ventilation. We design the frame around your machine layout.
It depends on size, height, crane, roofing and site conditions. Our cost guide gives a starting range, and we give an exact price after we see your drawings and requirements.
Nearby locations we serve
We also supply across the state; see our PEB manufacturer in Haryana page, and nearby city pages for Bahadurgarh, Jhajjar and Hisar. All our service areas are on the PEB locations page. For an example of finished work, read our 20,000 sq ft warehouse case study in Tapa Mandi for Ashirvad by Aliaxis.
Get a quote for your Rohtak project
Planning a pre-engineered building in Rohtak? Send us your plot size and requirements and our team will reply with a design and price.
- Toll-free: 1800 309 1940
- WhatsApp: +91 85568 00185
- Email: info@mahawarprefab.com
To know more about PEB and Structural Steel
- Detailed brochure outlining PEB features, benefits, and specifications.

